T-5000 IN-CIRCUIT BOARD PROGRAMMER

 

  • PROGRAMS WHOLE CIRCUIT BOARDS IN ONE PASS
  • 100 WATTS OF PROGRAMMING POWER
  • PENTIUM 100 MHz AT COMPATIBLE WORK STATION
  • 1.7 GAGA BYTE HARD DRIVE
  • 3.5 INCH FLOPPY,1.4 MEGABYTE
  • DUAL PROCESSOR FOR HIGH SPEED
  • VGA COLOR OR MONOCHROME DISPLAY
  • COMPLETE TURNKEY SYSTEM

A NEWER AND BETTER WAY TO DO AN OLD JOB

The T-5000 in-circuit programmer lets you program your EPROMs, Microcomputers and other devices after they have been installed in your circuit boards.This in-circuit programming technique has many advantages over conventional single device or gang programming methods.

This is our fourth generation of dedicated in-circuit programmers. Advanced features, ease of operation, cost effectiveness and flexibility are the result of nearly 10 years of experience in manufacturing dedicated in circuit programmers.

ACHIEVING HIGH PRODUCTION LEVELS

The T-5000 provides very high programming throughput with a very low labor requirement. This system will program boards containing 32 or more devices at a time. The operator need only plug in one or a group of boards, key in a file name for the data and press one key to select "PROGRAMMING" from the menu. The operator can then turn his or her attention to other things while the T-5000 automatically blank checks each device on the board,programs the entire memory space on the board and then tests the board to see that the entire data base has been properly programmed into the card.

The flexibility of the T5000 allows it to program any size and shape of the circuit board containing any mixture of EPROM, EEPROM, Microcomputer and other types of programmable devices at once.

SIMPLIFYING YOUR MANUFACTURING PROCESS

By programming in-circuit you can treat the entire circuit board as though it is a single device no matter how wide the data bus is. You no longer have to break the data into small segments in order to program individual EPROMs, you no longer have to label each EPROM and you no longer have to separately test the boards after the EPROMs are installed. This technique improves efficiency by reducing the number of manufacturing and quality control steps required to produce a fully assembled,programmed and tested circuit board with programmable devices on it.

REDUCING YOUR COST AND IMPROVING YOUR PRODUCT

Significant cost savings can be realized in manufacturing by in-circuit programming. Eliminating the sockets which are commonly used for EPROMs reduces the component cost of the circuit boards and more importantly it improves the reliability of your end product. Eliminating the sockets means no more corrosion, bent pins,improper insertion or faulty sockets.

REPROGRAMMING APPLICATIONS

Reprogramming is easy when you have a T-5000 system. All you have to do is place the circuit board in a eraser if devices are EPROMs and then program them on the T-5000. There are no component handling steps and the original circuit board quality is maintained. Since the T-5000 is portable, you can take it to depot or field service locations for reprogramming.

TWO PROCESSORS

The T-5000 is a dual processor system. The Pentium processor running under MS-DOS provides all the system level functions. The actual programming and reading of your circuit boards is controlled by an 8 megahertz HD64180 microprocessor which is installed on a plug-in slave board.

64 bi-directional address and data lines and 16 control lines are provided for flexibility. The system also has 8 power lines for programming as well as fixed 5 VDC,12 VDC and -12 VDC switchable power lines for circuits which may be on your circuit cards. The power for programming is supplied by two switching power supplies that are controlled by digital to analog converters.

SPECIFICATIONS

POWER 117 VAC 2.0AMPS (220 VAC optional)
WEIGHT 39 pounds (17.5 Kg)
SIZE 19 x 24 x 8
ENVIRONMENTALS Temperature 40 to 115F (5 to 32 C), humidity 10% TO 90% with no condensation

Built to Mil-I-45208

Specifications subject to change without notice

Home OtherProducts T10DSK T10ULC GangProgramer In-circuit T2000 T4000 T6000 More Info

Sunrise Electronics,Inc 2079 Wright Ave. Unit #B3, La Verne CA 91750

Ph:(909)593-5376 Fax: (909)593-2829 Email:sales@sunriseelectronics.com