T-4000 LOW COST IN CIRCUIT PROGRAMMER
LOW COST USER DEFINABLE PROGRAMMER
The T-4000 programs any type and size of programmable device, including EPROMs, EEPROM's, FPGAs, CPLDs, EPLDs and Microcomputers.
The T-4000 provides the following money saving benefits:
No sockets are required on PCB.
Increases product quality no bent pins or improper installation possible
Lower cost of manufacturing through elimination of second operation on PCB.
In-circuit operation; reprogram devices without removal or replacement. Simultaneously test board.
FOR GANG, GANG SET OR IN-CIRCUIT PROGRAMMING
Program Up to 32 Circuit Boards in One Pass
450 watts of Programming Power
Complete Turnkey System
Interface Compatible with T-8000
THE MOST COST EFFECTIVE PROGRAMMING METHOD
The T-4000 has a custom adapter that interfaces with your circuit cards. The adapter is configured with sockets and cables to convert your PCB's to T-4000
By eliminating the sockets commonly used for programmable devices, significant cost savings can be realized in manufacturing through lowered component cost and programming labor. Moreover, it improves reliability of the PCB by eliminating corroded or faulty sockets and bent pins and reduces the possibility of improper insertion.
The T-4000 provides high programming throughput coupled with reliable, hands-free operation, automatically performing Blank check, programming and device test on up to 32 cards simultaneously.
|POWER||117 VAC, 2.0 AMPS(220VAC)|
|WEIGHT||18 POUNDS (8.2 Kg)|
|SIZE||19 X 24 X 4 inches|
|ENVIRONMENTALS||Temperature 40 to 115ºF (5 to 32º C), humidity 10% TO 90% with no condensation|
BUILT TO MIL-I-45208
Specifications subject to change without notice
Home OtherProducts T10DSK T10ULC GangProgramer In-circuit T2000 T5000 T6000 More Info
Sunrise Electronics,Inc 2079 Wright Ave. Unit #B3, La Verne CA 91750
Ph:(909)593-5376 Fax: (909)593-2829 Email:email@example.com