T-2000 LOW COST IN-CIRCUIT
The T-2000 is the quickest and easiest method to start using in-circuit programming for R&D laboratory and low volume production. In-circuit programming improves productivity and reliability. User friendly software allows the operator complete and accurate access to program and reprogram complete circuit cards.
LOW COST USER DEFINABLE IN-CIRCUIT PROGRAMMER
The T-2000 in-circuit programmer programs your EPROMs, Flash EPROM's, PLD's, Microcomputers and other devices after they have installed in your circuit card. You supply your own MS-DOS personal computer to drive the T-2000.
Sunrise will provide a complete turnkey software and hardware system. Turnkey systems include custom printed circuit board interface adapter, software written and documented to MIL standards and documentation to DOD-D-1000 standards.
The T-2000 is our fourth generation of dedicated in-circuit programmers. Advanced features,ease of operation, cost effectiveness and flexibility are the result of experience since 1977 manufacturing dedicated in-circuit programmers.
PROGRAMS A WHOLE CIRCUIT BOARD IN ONE PASS
COMPLETE TURNKEY SYSTEM
UPWARD COMPATIBLE WITH T-4000, T-5000 and T-8000
PROCESSING CIRCUIT CARDS ON YOUR T-2000
The T-2000 will program a whole circuit card in one pass. The entire circuit card is treated as one large device. The T-2000 automatically test for shorts, verifies your card is blank, programs the card, verifies the program, then performs a checksum and CRC of the entire circuit card. You can even set the programmer up to program the checksum, CRC and serial number of the card into the memory. The T-2000 allows you to program or verify down to a single word. For the purpose of testing, the system can be set in a continuous loop on a specific address or range of addresses. Voltage levels can be adjusted in 0.01 volt steps.
T2000.EXE : T2000 DEMO PROGRAME
|POWER||Drawn from MS-DOS personal computer (386 or better),5 watts, quiescent|
|SIZE||9.8 x 5.6 x 1.2 inches(25 x 15 x 3 cm)|
|ENVIRONMENTALS||Temperature 40 to 115ºF (5 to 32º C), humidity 10% TO 99% with no condensation|
Features and specifications are subject to change without notice.
Home OtherProducts T10DSK T10ULC GangProgramer In-circuit T4000 T5000 T6000 More Info
Sunrise Electronics,Inc 2079 Wright Ave. Unit #B3, La Verne CA 91750
Ph:(909)593-5376 Fax: (909)593-2829 Email:email@example.com